Dr. Krishnanand Lanka is a Professor at the Department of Mechanical Engineering at the National Institute of Technology in Warangal, Telangana, India. His interests include industrial engineering, CAD/CAM, supply chain management, and additive manufacturing. He has published several articles in various journals, including the Journal of Manufacturing Processes, International Journal of Supply Chain Management, and Management Science and Productivity. He has also supervised Ph.D. students in the areas of Supply Chain Management and Additive Manufacturing. Dr. Krishnanand Lanka has also organized workshops and conferences on strategic leadership for higher education, PMBOK 4th Edition, Outcome Based Accreditation Process and Parameters, and Additive Manufacturing. His research has been published in various journals and conferences, showcasing his expertise in these areas.

More Info....

Dr. Srinivasa Rao S is a Professor in Mechanical Engineering at the National Institute of Technology, Warangal, India. He has a Ph.D. in Thermal Engineering from IIT Bombay and an M.Tech. in Heat Power Engineering from JNTU College of Engineering. He has extensive professional experience in teaching, industry, and guidance. His research interests include two-phase flow, I.C. engines, experimental heat transfer, and solar energy. Dr. Srinivasa has published numerous articles and has executed sponsored research and consultancy projects.

More Info....

Dr. Srikanth Korla is a Professor in the Department of Mechanical Engineering at the National Institute of Technology Warangal. He has more than sixteen years of teaching and research experience. He pursued his PhD in Mechanical Engineering from Florida International University, USA. Besides his interest in teaching Product Design courses, his Research areas also include Structural Health Monitoring using AI/ML, Energy Harvesting, and Hybrid Composite Laminates. He has supervised/supervising seven PhD scholars and guided several PG and UG Students at NIT Warangal. He has been granted two Indian patents. He has executed three research and course development projects and published several research articles in various reputed journals and conferences. He coordinated many faculty development programs and was also a part of organizing an international conference at NIT Warangal. He has taken up various administrative roles at NIT Warangal which mainly include Associate Dean (Academic audit), Vice Chairman (Admissions), Hostel Warden, Faulty In-Charge (Robotics Club & Value Education club), NCC caretaker etc.

More Info....

Dr. G. V. Ramana is an Assistant Professor at the National Institute of Technology, specializing in rock mechanics and engineering, conducts in-situ and laboratory investigations, designs and analyzes underground structures, and investigates geotechnical engineering and landslides. Experience includes serving as an Assistant Professor at NIT Warangal, a scientist at CSMRS, and an Assistant Engineer at Hindustan Aeronautics Limited.

More Info....

Dr. Joseph Davidson M is a professor at the Department of Mechanical Engineering at the National Institute of Technology in Warangal, Telangana, India. His interests and specialization include Metal Forming, CAD/CAM, wire arc additive manufacturing, and materials modeling. He has published several articles in various journals and publications. Along with these, he got a patent in his name. He has also supervised several Ph.D. students, PG and UG students on their thesis work. He have handled several sponsored research projects from DST and SERB core research grant of a total worth 91.16 Lakhs. He has several contributions to the Institute and various outreach activities. He is honored with “Best Young Researcher” award from NIT Warangal and NIT Alumni Association in the year 2014.

More Info....

Dr. Yennam Ravi Kumar is a Professor in the Mechanical Engineering Department at the National Institute of Technology (NIT), Warangal. He obtained B.Tech Degree in Mechanical Engineering from JNTU, Kakinada in 2000, M.E in Computer Integrated Manufacturing (CIM) from PSG College of Technology, Coimbatore in 2002, Ph.D. in Mechanical Engineering from Osmania University, Hyderabad in 2011 and Post-doctorial research in 3D Printing at Milwaukee School of Engineering, USA in 2012. He has supervised more than forty M.Tech Projects and produced six Ph.D’s and four more Ph.D theses under progress. He has published more than eighty-five research papers in National and International conferences and journals. He has been granted one US patent and two Indian patents. He is instrumental in setting up Rapid Prototyping laboratory at NIT Warangal. He started M.Tech Program with a specialization in Additive Manufacturing in collaboration with Central Manufacturing Technology Institute (CMTI) Bangalore, first time in India. He has established a world-class “Metal 3D Printing Facility” at NIT Warangal under TEQIP-III grant. He has executed sponsored R&D Projects worth 1.24 Crore Rupees in the area of 3D Printing. He has conducted more than twenty-five training programs and trained around two thousand participants in the area of “3D Printing”. He received the “Young Engineer of the Year 2009 Award” from the Government of Andhra Pradesh and The Institute of Engineers (India).

More Info....

Dr. E Suresh Babu is an Assistant Professor, at the Department of Computer Science and Engineering, National Institute of Technology, Warangal, He obtained his Ph.D. from JNTU Kakinada, specializing in Networking and Security, in 2017. He secured his M.Tech in Computer Science and Engineering from Visvesvaraya Technological University, Belgaum, in 2007 and B.Tech in Computer Science and Engineering from JNTU Hyderabad in 2003. His works are on Blockchain Technology, Internet of Things, IoT Security, Fog Security, Edge Security, Wireless Networks, and Wireless Networks Security. Some areas where he has contributed include DNA Cryptography, Mobile Adhoc Networks, Security Attacks and Defense Measures, and IoT Security using Blockchain. He has published 50+ refereed Journals, 20+ Conferences, 10 Book chapters, 2 Text Books, and Three Patents. Dr. Babu received CSI Academic Award “Paper Presenter Award at International Conference” held at CSI Annual Convention conducted from 19th through 21st January 2018 at Science City, Kolkata, and Received Two more Best Paper Wards at International Conference. He has 18 years of Research and Teaching Experience with different levels of Professors, Associate, and Assistant professors. In the past, He was awarded the Best Teacher Award Twice for the Academic years 2015-2016 & 2016-2017 at K L University, Vaddeswaram. Dr. Babu has held various administrative positions at K L University, Vijayawada, AP., including Director, Associate-Dean (UG & PG Research and Academic Projects), BOG, Academic Council Member, Head of the Department (CSE), and Co-Convener of University Technical Fest.

More Info....

Dr. V. Vasu is serving as a Professor Mechanical Engineering & Associate Dean (Industrial Consultancy) at National Institute of Technology, Warangal, India. Prof. Vasu Graduated in Mechanical Engineering from Nagarjuna University, PG in Manufacturing Engineering from BITS, Pilani, PhD from JNTU, Hyderabad and POST-DOC under Erasmus Mundus fellowship from Politecnico Di Milano, Italy, Europe. His areas of research are Mechatronics, Industrial Automation, Robotics, IIoT and Smart Manufacturing. He has published 45 research papers in International Journals and has participated in several conferences and presenting technical papers. He Developed online pedagogy course for “Mechatronics” and Systems & Controls under ICT MHRD, India. He has executed sponsored research projects worth of 1.37Cr funded from different funding agencies. He was awarded Young Engineer 2010 Award by IE India and Govt of AP and Outing Standing Engineer 2021 from IE India Jaipur chapter on 75th Independence Day during 15th August 2021.

More Info....

Dr. P. Vamsi Krishna is the professor in the Department of Mechanical Engineering at the National Institute of Technology in Warangal, Telangana, India. His interests and specialization include Solid Lubricants, Nano-cutting fluids, Vibration assisted machining, Modeling and Simulation, and Composite materials. He has published several articles in various journals and publications. He has also supervised several Ph.D. students, PG and UG students on their thesis work. He have handled several sponsored research projects from DST and SERB. He has several collaboration with many Academic scholars around the world as well as with many renounced industries like TATA Advances Systems limited, ARCI, Hexagon Capability Centre india Pvt. Ltd. For the Lab establishment on Advances Metrology. He is Awarded “Best Reviewer Award” for transaction of Indian Institute of Metals for 2020

More Info....

Dr. Kanasottu Anil Naik is an Assistant Professor at the Indian Institute of Technology Roorkee, specializing in wind energy system grid integration issues, partial shading in PV solar, intelligent controller applications in power systems, and micro-grid stability and control. He holds a Ph.D in Electrical Engineering, M.Tech in Power system, and B.Tech in Electrical and Electronics Engineering. He has previously worked as an Assistant Professor at VBIT Hyderabad, and IMS Engg. College Delhi.

More Info....

Dr. Srinagalakshmi Nammi is an Asst. Professor in the Department of Mechanical Engineering. She works in the area of advanced manufacturing, primarily focusing on laser micro machining, hybrid laser aided chemical etching, underwater laser micromachining and abrasive water jet machining. During her PhD at IIT Madras she developed a novel pump and probe technique to study the plasma generated during laser scribing of copper thin films. Currently at NIT Warangal she is working towards developing energy efficient battery materials.

More Info....

Dr. Shivraman is an assistant professor in the Department of Mechanical Engineering at National Institute of Technology (NIT-Warangal) in Telangana, India. He received his B. Tech in mechanical engineering from the College of Engineering Roorkee and Masters from the Indian Institute of Technology Roorkee in 2012. He completed his Ph.D. His research interests include wire arc additive manufacturing, machine learning in welding and additive manufacturing, dissimilar material joining, wear behavior of materials, and welding metallurgy. His work primarily focuses on establishing a structure-property correlation of welded and processed surfaces for industrial applications. He has published 12 research articles and 2 book chapters in various international journals. His research has been published in various journals, including Tribology International, Materials Research Express, and Materials Research Express. He has also contributed to various publications, such as "Mechanical and tribological characterization of Al-Si product developed by wire arc additive manufacturing," "Investigating the structure-property correlation for wire arc additive manufactured nuclear-grade stainless steel," and "Characterization of WAAM Additive Manufactured Component for Electronic Packaging.

More Info....

Dr. Gangadharudu Talla is an Assistant Professor in Mechanical Engineering Department at National Institute of Technology (NIT), Warangal. He obtained B.Tech Degree in Mechanical Engineering from Andhra University in 2007, M.Tech in Industrial Engineering from Visvesvaraya National Institute of Technology, Nagpur in 2010, Ph.D in Mechanical Engineering from National Institute of Technology, Rourkela in 2016. In his eight years of teaching profession, he has worked at NIT Raipur and NIT Andhra Pradesh before joining NIT Warangal. His research areas include modern machining processes, hybrid machining, modelling and optimization. He has supervised more than 4 B.Tech projects and 12 M.Tech Projects. Currently 2 students are pursuing PhD under his guidance. He has published more than 20 research papers in journals and international conferences. He is the overall coordinator of M.Tech programs of Mechanical Engineering Department. He was the member of syllabus revision committee, NBA committee, newsletter committee among others.

More Info....

Dr. Venkatesh Gudipadu is an Assistant Professor in the Department of Mechanical Engineering at NIT Warangal. His interests include machine learning applications in manufacturing, abrasive flow machining, magnetic abrasive finishing, microwave material processing, hybrid machining, advanced manufacturing processes, surface engineering, and computational intelligence in manufacturing. He has published several articles, such as "Surface Texture Improvement of Magnetic and Non-Magnetic Materials Using Magnetic Abrasive Finishing," "On surface integrity of Hastelloy C-276 using Chemo Based Ultrasonic-Assisted Magnetic Abrasive Finishing Process," "Fine Finishing of SiC Microchannels using Abrasive Flow Machining," and "Performance Study of A Natural Polymer Based Media for Abrasive Flow Machining." He has also been a lecturer at RGUKT (AP IIIT Basar) and an associate professor at MGIT (Hyderabad). He has also been an assistant professor at BITS Pilani from 2016 to 2018. He has also been involved in various research projects, including a one-week GIAN course on multi-scale modeling of sheet metal forming, a one-week STTP course on Learning Management System (Moodle), and an expert lecture on the optimization of the Ultrasonic Assisted Abrasive Flow Machining (UAAFM) process. He has also been a member of the Technical Advisory Committee for the International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME-2021).

More Info....

Dr. Naresh Thota is an Assistant Professor at the Department of Chemical Engineering at National Institute of Technology (NIT Warangal) and has experience in Molecular Simulations, Materials Modelling, Energy, Environmental, and Healthcare applications. He has taught at NIT Warangal and NIT Rourkela, and has worked as a Research Fellow at the National University of Singapore and as an Assistant Systems Engineer at Tata Consultancy Services. He has published several papers, including "Ibuprofen loading and release in amphiphilic peptide FA32 and its derivatives: a coarse-grained molecular dynamics simulation study" and "Computational amphiphilic materials for drug delivery" in Frontiers in Materials. He has also presented at AIChE Annual Meetings and ICMAT 2013. he has received awards and honors, including Star of the Month at TCS in 2010.

More Info....

Dr. Manjaiah M. is an Assistant Professor in the Department of Mechanical Engineering at NIT Warangal, India. He received his M. Tech. in Production Engineering Systems Technology from the University BDT College of Engineering in 2011, and Ph.D. from NITK Surathkal in 2015. He has 3.5 years of postdoctoral experience from the University of Johannesburg, South Africa, and Ecole Centrale de Nantes-CNRS lab, France. Before joining NIT Warangal, he worked as an Assistant Professor at Manipal Institute of Technology. Manjaiah is an active reviewer for various journals, including Elsevier, Transaction of Nonferrous Society of China, Measurements, Journal of Manufacturing Processes, Precision Engineering, Journal of Materials Research and Technology, Springer, Journal of Materials Engineering and Performance, Silicon, Journal of Mechanical Science and Technology, Journal of Thermal Spray Technology, and Taylor & Francis. He has also published several research articles, including "Ice-Jet Machining: A Sustainable Variant of Abrasive Water Jet Machining" and "Friction Stir Welding -An Overview". He has also supervised several PhDs and has been involved in research projects on mechanical and biological properties of Ti6Al4V lattice structures fabricated by SLM process.

More Info....

Dr. Marrapu Bhargava is an Assistant Professor with research interests in metal forming, sheet metal forming, formability evaluation and prediction, hydroforming, formability at elevated temperatures, mechanical behaviour of materials, heat treatment processes, and material model development. He holds a B.E in Mechanical Engineering from Andhra University, an M.Tech in Mechanical Engineering from Indian Institute of Technology Guwahati, and a Ph.D. prof. Bhargava has experience as a Research Engineer at Tube Investments of India, Deputy Manager, and Assistant Professor at NIT Warangal. His PhD thesis focuses on formability and microstructure analysis of Advanced High Strength Steels (AHSS): Dual Phase (DP), Transformation Induced Plasticity (TRIP), and Quenched and Partitioned (Q&P) steels.

More Info....

Dr. Thamarai Selvan Vasu is an Assistant professor in the Mechanical Engineering Department at National Institute of Technology, Warangal (NITW). He obtained a B.E Degree in Mechanical Engineering from Government College of Engineering, Tirunelveli, Tamilnadu in 2008, M.Tech in Machine Design (MD) from the Indian Institute of Technology, Guwahati (IITG) in 2011, Ph.D in Mechanical Engineering (Machine Design) from the Indian Institute of Technology, Bombay (IITB), in 2018. His research area includes Computational and Theoretical Solid Mechanics, Contact Mechanics, Indentation Modelling, Fracture Mechanics, Thermal Stresses, Finite Element Modelling and Analysis, Mesh free Methods, Computer-Aided Design (CAD), Computer Aided Engineering (CAE), Molecular Dynamic Simulations and Machine Learning.

More Info....

Dr. Prasanth Anand Kumar Lam is an Assistant Professor at NIT Warangal, India, with over three and a half years of industrial experience in the Global R&D Centres of LG Electronics and Whirlpool Corporation. He has published six patents and research work in five reputed international journals and contributed to 13 international conference proceedings. His research interests include computational fluid dynamics, turbulence, aerodynamics, fluid-structure interaction, biofluid mechanics, heat transfer augmentation, and refrigeration & air-conditioning. He has published several papers in various journals and conferences, including the International Journal of Heat and Mass Transfer, ASME Journal of Thermal Science and Engineering Applications, Energy Conversion and Management, and Energy Conversion and Management. He has also presented at various workshops and conferences, including the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference, the 68th Annual Meeting of the American Physical Society’s Division of Fluid Dynamics, the ASME 2015 International Mechanical Engineering Congress & Exposition, the International Conference on Computer Aided Engineering (CAE-2013), the 17th International Conference on Finite Elements in Flow Problems (FEF 2013), the 16th International Conference on Finite Elements in Flow Problems (FEF 2011), and the 13th Asian Congress on Fluid Mechanics.

More Info....

Dr. Tadepalli is a structural engineering and mechanics expert with expertise in structural dynamics, nonlinear finite element analysis, composite materials, vibration testing, photoelastic testing, high strain rate SHPB testing, shock testing, multi-scale modelling, micro-mechanics, and non-destructive evaluation. He has worked on experimental characterization and analytic modelling of material and structure response to shock and high strain rate loading. Dr. Tadepalli coordinated the setup and operations of a Shock Tube-based Blast Testing Simulator at the University of Mississippi and developed novel computational modelling methodologies to predict multi-scale behaviour of cementitious materials under ballistic and shock loading conditions. He has previously worked as a Senior Engineer at Hinman Consulting Engineers and as the Project Engineer for NEESiT at UCSD.

More Info....

Dr. Ravi Prasad holds a Ph.D. in Structural Engineering from NIT Warangal and an M.E in Civil Engineering from MN NIT Allahabad. He has worked as an Assistant Professor at NIT Warangal since July 2022. He has also held positions as an Asso. Professor at GMR Institute of Technology, Rajam, and as an Adhoc Lecturer at NIT Warangal. He has also served as a Teaching Assistant at S.V. University, Tirupati. Dr. Prasad has received several awards and fellowships, including a MHRD fellowship for post-graduation at MN NIT Allahabad and a best faculty award for commendable classroom teaching at GMRIT Rajam.

More Info....

Dr A V Giridhar received his M.Tech (Computer Applications in Industrial Drives) from Malnad College of Engineering, Hassan, Karnataka. He has done Industrial Training and Projects from MICO BOSCH (Now Bosch India Ltd.), Bangalore on PC-based Measurement and Automation of Alternator Performance Test Systems and also done Temperature automation for alternator performance testing. He received his doctorate from the Indian Institute of Technology, Madras in 2011 on Partial Discharge activity using Ultra high-Frequency sensor techniques in Liquid Nitrogen Insulation for High-temperature superconducting (HTS) power applications. He joined the National Institute of Technology Warangal in 2012. He has published more than 20 articles in Journals and Conferences. His research areas include high voltage Engineering, condition monitoring & diagnosis of high voltage power apparatus, Industrial Instrumentation and Automation, Pulsed Power Technology and Nano Dielectrics. At present, he is working on the SPARC project as a Co-PI. Also, he had done consultancy services to the state power utility. He is a senior member of IEEE.

More Info....

Dr. Siva Sarma, a Professor at the Department of Electrical Engineering at National Institute of Technology, is a specialist in power quality, power system protection, condition monitoring of electrical equipment, and switching transients. He is currently serving as Head of the Centre for Training & Learning (CTL) and has taught courses in various subjects such as digital protection of power systems, power systems lab, and electrical MC lab. He has also conducted Ph.D. dissertations on various topics, including transient effects of PWM inverters on rotating machines, analysis, classification, and mitigation techniques of voltage sagswell and harmonics, digital protection algorithms for EHV Teed and multiterminal transmission circuits, fault diagnosis schemes for three-phase induction motors, optimal selection and placement of phasor measurement units for power system protection, advanced signal processing techniques for real-time estimation and control of harmonics in smart electric grids, and demand response management for improving power quality using deterministic non-invasive load pattern monitoring techniques for smart homes. He has published several papers, including Discrimination of Transformer Inrush currents and Internal Fault Currents using Extended Kalman Filtering Algorithm (EKF) and Demand-side Management for improvement of (PHDs Supervised).

More Info....

Dr Ram Krishan is an Assistant Professor in the Department of Electrical Engineering, at NIT Warangal. He received his M. Tech in Power Systems from NIT Hamirpur, Himachal Pradesh in 2013 and Ph. D. in Stability and Optimization of AC/DC Power Systems from IIT Delhi in 2018. He has worked in Deloitte India LLP and has over 2 years of industry experience in the Power and Energy sector. He was involved in the Renewable Integration and Sustainable Energy (RISE) initiative project of USAID/India to support the Government of India’s (GOI) efforts to manage large-scale integration of Renewable Energy. He has worked with CERC, POSOCO, PGCIL, NTPC, and KPTCL. He has worked on the AGC and Dynamic Reactive Power control of Large Solar Parks and Battery Energy Storage System pilot projects in India. He was also actively involved in different industry projects associated with transmission and distribution system analysis, Battery Energy Storage Systems, Renewable Integration and Electrical vehicles (EVs) to Grid (V2G). He has published more than 15 research papers in peer-reviewed journals and conferences. His present research interest is power system modeling, stability analysis, load flow, Battery Energy Storage Systems and Grid Integrated Renewable Energy Sources.

More Info....

Dr. D Sreenivasarao is an Associate Professor in the Department of Electrical Engineering, focusing on power quality, custom power devices, Flexible AC Transmission Systems, multilevel inverters, and improved power quality converters. He holds a Ph.D. in Power Quality Improvement using D-STATCOM from IIT Roorkee in 2014, an M.Tech. in Power Apparatus and Electric Drives from IIT Roorkee in 2008, and a B.Tech. from Bapatla Engineering College in 2006.

More Info....

Dr. G. Siva Kumar, Associate Professor in Electrical Engineering, specializes in power electronics applications in power systems, renewable systems, and AC microgrids. He holds a B.Tech in Electrical and Electronics from G. Pulla Reddy Engineering College and an M.Tech in Power Electronics from JNTUH College of Engineering.

More Info....

Dr. G. Siva Kumar, Associate Professor in Electrical Engineering, specializes in power electronics applications in power systems, renewable systems, and AC microgrids. He holds a B.Tech in Electrical and Electronics from G. Pulla Reddy Engineering College and an M.Tech in Power Electronics from JNTUH College of Engineering.

More Info....