DR. NEELAKANTESWARA RAO A

Professor

Department of Mechanical Engineering

National Institute of Technology, Warangal - 506004, Telangana, INDIA

: neelu@nitw.ac.in

: 9866302362

Interests: Operations Management, Supply Chain Management, Theory of Constraints, Quality Engineering and Management

Specializations

Operations Management; Quality Engineering & Management; TOC


 

Message


 

 

Course Taught Previously


Engineering Graphics; Industrial Management; Management Science and Productivity; Production Management

Integrated Production Control Systems; Supply Chain Management; Statistics for Management; Quantitative Methods for Management;

Strategic Design of Operations; Operations Planning & Control; Total Quality Management; Quality Engineering

 

Courses Currently Being Taught


Management Science and Productivity; Production Planning and Control

Integrated Production Control Systems; Design and Analysis of Experiments

 

Journal Publication Details


1. Neelakanteswara Rao A and Bhadury B, Opprtunistic Maintenance of Multi-Equipment System: A Case Study, Quality and Reliability Engineering International, Vol.16, 2000, pp.487-500.

2. G Srinivasarao and A Neelakanteswara Rao, Optimization of Parameters in Turning, Caledonian Journal of Engineering, Vol.3(2), 2007, pp.12-17.

3. Srinivasa Rao G and Neelakanteswara Rao A, Application of Central Composite and Orthogonal Array Designs for Predicting the Cutting Force, International Journal of Manufacturing Science and Technology, Vol.3(2), 2009, pp.157-170.

4. G Srinivasa Rao and A.N.Rao, Tool Parameters Optimization using Technique for Order Preference by Similarity to Ideal Solution, International Journal of Advanced Manufacturing Systems, Vol.1(2), 2010, pp.127-137.

5. G Srinivasa Rao and A Neelakanteswra Rao, "Comparison of Central Composite and Orthogonal Array Fesigns for Cutting Force and Surface Roughness Prediction Modelling in Turning, Vol.43(1/2/3/4), 2012, pp144-164.

 

Conference Proceedings


1. Neelakanteswara Rao A and Bhadury B, A Measure of Availability to take into account of Partial Outages: A Case of a 210 MW Thermal Power Unit, Presented at the National Conference on Quality and Reliabilty, IIT, Bombay, December 3-6, 1990. (Page 13-14, Booh of Abstracts).

2. Neelakanteswara Rao A and Bhadury B, Maintenance Planning for Thermal Power Units: A Discussion, Accepted for presentation at IEEE/PES 1992 Summer Meeting, Seattle, WA, July 12-16, 1992. (Paper No.: 92 SM 486-1EC; The paper could not be presented)

3. Neelakanteswara Rao A and Bhadury B, Maintenance Scheduling in Thermal Power Units: Issues of Importance in Indian Context, Proceedings of the National Workshop on Failures of Boilers and Auxiliaries, Institute of Technology, BHU, Varanasi, December 3-4, 1992, pp. A3.1-A3.10. (One of the four Key Note Papers)

4. Srinivasa Rao G and Neelakanteswara Rao A, Cutting Force Prediction: Re-visited, Proceedings of the International Conference on Emerging Technologies in Intelligent Systems and Control (EISCO-2005), Kumaraguru College of Technology, Coimbatore, January 5-7, 2005, Vol. 1, pp.32-36.

5. Radha Krishna A and Neelakanteswara Rao A, CONWIP Flow Shop: A Case Study, Presented at the IX Annual Conference of The Society of Operations Management, Pondicherry University, December 16-18, 2005 (Page 79, Book of Abstracts).

6. Srinivasa Rao G and Neelakanteswara Rao A, Prediction of Surface Roughness Model Using Design of Experiments, Proceedings of the International Conference on Intelligent Systems and Control (ISCO-2006), Karpagam College of Engineering, Coimbatore, India, August 9-11, 2006, pp.328-331.

7. Soma Sudarshan Ch and Neelakanteswara Rao A, Supplier Assessment: An Application of Analytical Heirarchy Process, Presented at the X Annual Conference of The Society of Operations Management, IIM, Ahmedabad, December 21-23, 2006 (Page 37, Book of Abstracts).

8. Srinivasa Rao G and Neelakanteswara Rao A, Optimization of Parameters in Turning, Proceedings of the International Conference on Modelling and Simulation (CITICOMS-2007), Coimbatore Institute of Technology, Coimbatore, India, August 27-29, 2007, pp.465-471.

9. Neelaknteswara Rao A, Supply Chain Coordination Through Pull Control: A Discussion on Issues of Complexity, Presented at the XI Annual Conference of The Society of Operations Management, SIOM, Nashik, December 21-23, 2007 (Page 42, Book of Abstracts).

10. Srinivasa Rao G and Neelakanteswara Rao A, Application of Central Composite and Orthogonal Array Designs for Predicting Cutting Force, Proceedings of the 2nd International & 23rd AIMTDR Conference, Indian Institute of Technology, Chennai, India, December 15-17, 2008, pp.799-812.

11. Srinivasa Rao G and Neelakanteswara Rao A, Optimal Parametric Combination for Achieving the Desired Surface Roughness in finish Hard Turning of AISI52100 Steel, Proceedings of the 2nd International & 23rd AIMTDR Conference, Indian Institute of Technology, Chennai, India, December 15-17, 2008, pp.861-866.

12. Srinivasa Rao G, Neelakanteswara Rao A and Sudheer NVVS, Performance Evaluation of Carbide Inserts on Surface Roughness in Hard Turning, Proceedings of the 3rd International & 24th AIMTDR Conference, Andhra University College of Engineering, Visakhapatnam, India, December 13-15, 2010, pp.647-651.

13. Srinivasa Rao G and Neelakanteswara Rao A, A Genetic Algorithm Approach to Multi-Objective Optimization in Turning, Proceedings of the 3rd International & 24th AIMTDR Conference, Andhra University College of Engineering, Visakhapatnam, India, December 13-15, 2010, pp.1199-1204.

 

 


Ph.D.'s Supervised


Parametric Studies in Turning using Design of Experiments and Taguchi Approaches

G. Srinivasa Rao (2008)

 

 

Workshop/SSTPs/Conference Organized

Two weeks STTP on Quality Engineering in Manufacturing, NIT, Warangal (22-03-2004 to 02-04-2004)







DST/AICTE/MHRD or Other Sponsord R&D Projects







Awards And Honours







Additional Responsibility