Dr. VENU GOPAL A

Professor

Department of Mechanical Engineering

National Institute of Technology, Warangal - 506004, Telangana, INDIA

: venu@nitw.ac.in

: 08702462338

Interests:

Educational Qualifications:

  1. Ph. D. in Manufacturing Engineering from IIT Delhi, Hauz Khas, New Delhi, 2003
    • Thesis: An Investigation on the Influence of Grinding Parameters on Surface Integrity in Grinding SiC  
    • Supervisor: Dr. P.V. Rao, Professor, Mechanical Engineering, IIT Delhi
  2. M. Tech. in Machine Tools from Regional Engineering College, Warangal, 1990
  3. B. Tech. in Mechanical Engineering from K.L. College of Engineering, Nagarjuna University, 1986

Professional Experience:

  1. Professor, Department of Mechanical Engineering, NIT Warangal since July 2010
  2. Associate Professor, Department of Mechanical Engineering, NIT Warangal from April 2006 to June 2010
  3. Assistant Professor, Department of Mechanical Engineering, NIT Warangal from Nov. 2003 to March 2006
  4. Sr. Lecturer (Sel. Gr.)/Sr.Lecturer/Lecturer, Department of Mechanical Engineering, NIT Warangal between June 1992 to Oct. 2003
  5. Teaching Assistant, Department of Mechanical Engineering, NIT warangal from Aug. 1989 to April 1992
  6. Teaching Assistant, Department of Mechanical Engineering, KL College of Engineering, Nagrjuna University from Dec. 1986 to April 1988.

Research Supervision: 

Ph. D.:      Awarded: 3,     Thesis Submitted: 1,       In progress: 6.

 List of Ph.D. Guided: (awarded / working)

  1. Swapnil D Anjikar, Form Accuracy Analysis and Quality Inspection of Rapid Prototyping Parts, Ph.D. awarded in Jan 2009. (Co-Guide)
  2. D Chakradhar, Experimental Investigations on the Effect of Process Parameters on Geometrical Accuracies in Electrochemical Machining, awarded in Feb 2012.
  3. V Vinod Kumar, Investigations on Quality Issues of Rapid Prototyping Parts, awarded, March 2013. (Co-Guide)
  4. K Satyanarayana, Experimental studies on machinability characteristics: Modeling, Simulation, Analysis and Optimization of turning Ti-6Al-4V, Thesis submitted.
  5. T Sadasiva Rao, Optimization of Tool geometry and Process Parameters in Face Milling Inconel 625; Online tool condition monitoring working, 8th Semester.
  6. R Bhanu Pawan, Nano fluids Drilling, working, 3rd Semester.
  7. K Kishore Kumar, Sc.D., DRDO, Design and Fabrication of Special Cutting Tools for the Machining of Solid Propellants, working, 2nd Semester.
  8. Sandeep Kumar Venugopal, Nano Fluids Characterization and Performance evaluation during Machining, working, 2nd Semester (Co-Guide).
  9. V Srinivasa Rohit, Performance of Coating Tools while Machining High Temperature High Strength Alloys, working, 1st Semester.
  10. Puneet Chandran, SAF, ARCI-Hyderabad, Development of Coated Tools for High Speed Machining of Hard to Cut Materials under Dry Conditions, working, 1st Semester.

M. Tech:    Guided: 28

  1. Machinability and Diffusion Studies while Milling Inconel 718 with Coated Carbide Tools, I Bhushan Yugeshwar, Manufacturing Engineering, 2011-13.
  2. Machinability Studies in Face Milling Inconel 718, Srinivasa Rhot V, Manufacturing Engineering, 2011-13.
  3. Design and Prototype Fabrication of an Innovative Amphibious Vehicle: Hovomarine, Joby Yeldo, Manufacturing Engineering, 2010-12
  4. Effect of *rocess Parameters on Thrust Force Torque and Delamination in Drilling CFRP, D Veeranarayana, Manufacturing Engg, 2010-12
  5. An experimental study on machinability of Titanium alloy (Ti6Al4V-Grade 5), Manoj Kumar Poddar, Manufacturing Engineering, 2009-11
  6. Performance of CVD Coated carbide inserts in face milling inconel 718, Rajesh Valusa, Manufacturing Engineering, 2009-11
  7. Aircraft mounted accessory gear box sizing, B Nagasunil, Manufacturing Engineering, 2009-11
  8. Design of Hollow blades for low pressure turbines of aircraft engine, JL Narasimha Rao, Manufacturing Engineering, 2009-11
  9. Effect of approach angle in face milling using tungsten carbide tool, B. Sai Sudheer, Manufacturing Engineering, 2008-10
  10. Investigation on the effect of electrolytes in ECM, Dinesh D, Manufacturing Engineering, 2007-09.
  11. Tool condition monitoring using Cutting force measurements in turning, K Navya Krishna, 2007-09.
  12. Study of Approach angle in Face milling Cutter, Y Paidi Lingeswara Rao, Manufacturing Engineering, 2006-08
  13. Part Build Orientations based on Volumetric error ion fused deposition modeling, Alok Pandey, Manufacturing Engineering, 2006-08
  14. Evaluation of Geometries in Turning with varied parameters and its effect on Chip Breaking and cutting Forces, S Mahesh Kumar, Manufacturing Engineering, 2006-08
  15. A Finite Element Study of the Effect of Tool Geometry and Process Parameters in Orthogonal Machining, M.Prasad Babu, Manufacturing Systems Engineering, 2005-07
  16. Analytical Tool for Predicting Temperatures in Bus Bars of Motor Control Center, K.Nagaraj, Manufacturing Systems Engineering, 2005-07
  17. Flatness Evaluation using Minimum Zone Criterion, T Jaya Krishna, 2004-06.
  18. Optimization of Turning Operation Using Grey Relational Analysis and Utility Concept, G.Srinivasa Rao, Manufacturing Systemns Engineering, 2004-06.
  19. Finite Element Simulation of Orthogonal Metal Cutting Using Deform-2D, P.K. Srinivasa Rao, Manufacturing Systems Engineering, 2004-06
  20. Workspace Volume and Dexterity Analysis of Hexapod Manipulator, Ch.Nagini, Manufacturing Systems Engineering, 2003-05
  21. Optimization of SiC Grinding Using DoE and Genetic Algorithms, M.Subbaiah, Manufacturing Systems Engineering, 2002-04
  22. Transient Analysis of Shrink Fit Assembly Using Finite Element Approach, M.Prashanth, Advanced Manufacturing Processes, 2002-04.
  23. Design and development guidance scanning system using CADDS-5 and ADAMS software, Gurunath.P.Biradar, 1998-2000
  24. A software package for quality engineering using Taguchi methods, M.Ashok Kumar, 1997-1999.
  25. Customization of AutoCAD for drawing fluid power circuit diagram, G. Vijay Kumar, 1996-1998.
  26. Some experimental studies on seizure for Aluminum-Silicon under alloys unidirectional sliding, C. Ravi Kumar, 1995-1997.
  27. Automated fault analysis for hydraulic control systems, V. Venu Gopala Rao, 1994-1996.
  28. Development of Production line for manufacturing of precision class bearings, K. Hari Prasad, 1993-1995

Areas of Research:

  • Conventional and Un-Conventional Machining
  • Coatings for High Speed Machining
  • Rapid Prototyping
  • Metrology

Research Publications:

Journals

International

12

National

01

Conferences

International

15

National

06

 

International Journal Publications:

  1. Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, Online tool condition monitoring in turning Titanium (Grade 5) using Acoustic Emission:  Modeling, International Journal of Advanced Manufacturing Technology, ISSN No 0268-3768, Vol No: 63, number 9-12, (2012).
  2. Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, Design Optimization of Machining Parameters for Turning Titanium Alloys with Taguchi-Grey Method, Int. J. Machining and Machinability of Materials, Vol. 13, Nos. 2/3, (2013). pp 191-202,
  3. Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, Analysis for Optimal Decisions on Turning Ti6Al4V with Taguchi-Grey Method, Part C: Journal of Mechanical Engineering Science, Sage Publications. online edition: DOI 10.1177/0954406213480599
  4. Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, Taguchi analysis on cutting forces and temperature in turning Titanium Ti-6Al-4V, International Journal of Mechanical and Industrial Engineering (IJMIE), ISSN No. 22316477, Vol1, Issue4, (2012)  pp 55-59.
  5. Satyanarayana Kosaraju, Venu Gopal Anne and Bangaru Babu Popuri, Experimental Investigations and Modeling of Machining Titanium Alloy Ti-6Al-4V, Journal of Applied Mechanics and materials. Vols. 315, (2013) pp 562-566.
  6. Sadasiva Rao T, Satyanarayana K, Praneeth Y and A.Venu Gopal, Studies on the Effect of Approach Angle and Process Parameters in Face Milling, Journal of Applied Mechanics and Materials, Vols. 110-116 (2012), pp.3147-3155.
  7. V Vinod Kumar, GRN Tagore and A.Venu Gopal, Some Investigations on Geometric Conformity Analysis of a 3-D Freeform Objects Produced by Rapid Prototypng (FDM) Process, Int. Journal of Applied Research in Mechanical Engineering, Vol.1, No.2, (2011), pp. 82-86.
  8. D.Chakradhar and A. Venu Gopal, Multi-Objective Optimization of Electrochemical machining of EN31 steel by Grey Relational AnalysisInternational Journal of Modeling and Optimization, Vol.1, No.2, (2011), pp.113-117.
  9. A.Venu Gopal and P.Venkateswara Rao, A New Chip Thickness Model for Performance Assessment of Silicon Carbide Grinding - International Journal of Advanced Manufacturing Technology,Vol.24 (2004), pp.816-820.
  10. A.Venu Gopal and P.Venkateswara Rao, Performance Improvement of Grinding of SiC using Graphite as Solid Lubricant, Materials and Manufacturing Processes An Int. Journal, Vol.19, No.2, (2004), pp.177-186.
  11. A.Venu Gopal and P.Venkateswara Rao, Selection of Optimum Conditions for Maximum Material Removal Rate with Surface Finish and Damage as Constraints in SiC Grinding, International Journal of Machine Tools and Manufacture, Vol.43 (2003) pp.1327-1336.
  12. A.Venu Gopal and P.Venkateswara Rao, The Optimization of Grinding of Silicon Carbide with Diamond Wheels using Genetic Algorithms - International Journal of Advanced Manufacturing Technology, Vol.22 (2003) pp.475-480.

National Journal Publications:

  1. G.Srinivasa Rao and A.Venu Gopal, Optimization of Turning Process using Grey Relational Analysis and Utility Concept based on Taguchi Method Journal of Modern Manufacturing Technology, Vol.1, No.1, Jan-June 2009, pp. 93-104.

Internnational Conference Publications:

  1. Satyanarayana Kosaraju, Venu Gopal A and Bangaru Babu Popuri, Experimental Studies on the Effect of Rake Angle on Main Cutting Force and Surface Roughness in Machining Ti-6Al-4V, 2nd International conference on Advanced Manufacturing and Automation 2013 (INCAMA 2013), during 28-30th March 2013, Kalasalingam university, Tamil Nadu. pp. 565-568
  2. Satyanarayana Kosaraju, Venu Gopal A and Bangaru Babu Popuri, Experimental Investigations and Modeling of Machining Titanium Alloy Ti-6Al-4V, 3rd International Conference on Mechanical and Manufacturing Engineering 2012 (ICME2012), during 20th - 21st November 2012, Universiti Tun Hussein Onn Malaysia, Malaysia. pp. 155-159
  3. Satyanarayana Kosaraju, Venu Gopal A and Bangaru Babu Popuri, Online Tool Wear Monitoring using Cutting Forces in Turning Ti-6Al-4V, International Conference on Trends in Industrial and Mechanical Engineering (ICTIME 2012), 24-25 March 2012, Dubai, organized by PSRC . pp. 147-150
  4. Satyanarayana Kosaraju, Venu Gopal A and Venkateswara Rao Ghanta, Effect of Rake Angle and Feed Rate on Cutting Forces in an Orthogonal Turning Process, International Conference on Trends in Mechanical and Industrial Engineering (ICTMIE 2011), 23-24 December 2011, Bangkok, Thailand. pp. 150-15.
  5. A.Venu Gopal andD.Chakradhar, Parametric Optimization in Electrochemical Machining of Inconel 625 Alloy based on Grey Relation Approach, 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2011), February 2011, Singapore.
  6. D.Chakradhar and A.Venu Gopal, Experimental Study and Parameter Design of Electrochemical Machining of EN-31 Steel using Taguchi Method, 3rd International & 24th AIMTDR Conference, Dec. 2010, Andhra University, Vishakhapatnam (A.P).
  7. Manohar Goud K, Satyanrayana K, Sadasiva Rao T and Venu Gopal A, Online Tool Condition Monitoring in Face Milling Operation using Acoustic Emission, 3rd International & 24th AIMTDR Conference, Dec. 2010, Andhra University, Vishakhapatnam (A.P).
  8. D.Chakradhar and A.Venu Gopal, Design and Optimization of Process Parameters in Electrochemical Machining of Inconel 625 Alloy using Taguchi Method, 16th International Symposium on Electromachining (ISEM-XVI), April 2010, Shanghai, China.
  9. GRN Tagore, Swapnil D Anjikar and A. Venu Gopal, Multi Objective Optimization of Build Orientation for Rapid Prototyping with Fused Deposition Modeling (FDM), Solid Freeform Fabrication Proceedings, Aug 2007, The University of Texas at Austin.
  10. Swapnil D Anjikar, GRN Tagore, and A. Venu Gopal, Surface Roughness Evaluation of Rapid Prototyping Models, Solid Freeform Fabrication Proceedings, Aug 2007, The University of Texas at Austin.
  11. Srinivasa Rao PK, Venkateswara Rao G and Venu Gopal A, Finite Element Modeling and Analysis of Orthogonal Metal Cutting 1st International and 22nd AIMTDR Conference, Dec. 2006, IIT Roorkee.
  12. Karanam Jaya Krishna, G. Srihari and A. Venu Gopal, Evaluation of Circularity Error by Minimum Zone Method using Minimax Criterion, Global Congress on Manufacturing and Management 2006, Nov. 2006, Santos, Brazil.
  13. A.Venu Gopal and P.Venkateswara Rao, Assessment of Ceramic Grinding Process on the Basis of Surface Roughness and Grinding Damage 7th International Conference on Manufacturing, PCM 2002, Oct.2002, Bangkok.
  14. Mandeep Kumawat, A.Venu Gopal and P.Venkateswara Rao, A New Chip Thickness Model for Performance Assessment of Grinding Process, 17th International Conference on Computer Aided Production Engineering - (CAPE-2001), Oct. 2001, China.
  15. A.Venu Gopal, C.S.P.Rao and R.L.Murty, Software for the Generation of Part Program for Machining Plate CAMs, AMSE-91 International Conference, Oct.1991, Hangzhou China.

National Conference Publications:

  1. PK Srinivasa Rao, G.Venkateswara Rao and A. Venu Gopal, Finite Element Simulation of Orthogonal Metal Cutting using DEFORM 2D, National Conference on State of the art Technologies in Mechanical Engineering, May, 2006, Hyderabad.
  2. A.Venu Gopal and P.Venkateswara Rao, Influence of Grinding Parameters on Surface Finish and Damage of Ground Silicon Carbide, 20th AIMTDR Conference, BITS Ranchi, Dec.2002.
  3. A.Venu Gopal and P.Venkateswara Rao, Precision Machining Ceramic Grinding: A Review, 3rd SERC School on Precision Engineering, June 2002, IIT Kanpur.
  4. A.Venu Gopal and P.Venkateswara Rao, Recent Advances in Ceramic Grinding, Symposium on Manufacturing Excellence, Jan. 2002, IIT Madras.
  5. A.Venu Gopal, R.L.Murty and G.V.Rao, Life Testing of M2 & M42 End Mills while Machining C-45 Steel & Cast Iron, XV AIMTDR Conference, 1992, Coimbatore.
  6. C.S.P.Rao, A.Venu Gopal, R.L.Murty and G.Srihari, Computer Aided Design and Manufacture of High Precision Plate CAMs, XV AIMTDR Conference, 1992, Coimbatore.

Projects Executed:

  1. Investigation of the effect of approach angle on performance of coated carbide inserts in face milling Modeling & Optimization, funded by Department of Science and Technology, New Delhi, for Rs. 16.32 Lakhs. Project completed, April 2009 - Nov 2011.
  2. Pedagogy Project - NMEICT: Principal Course Developer for developing course on "Engineering Drawing", MHRD-IIT Kharagpur, Rs. 5.00 Lakhs, 2013-15.

Patents:

  1. Indian Patent, " Turbine Cutter Assembly for Machining Solid Propellant Grain", File No. is yet to be given.

Academic Contributions: 

  • Curriculum framing of Manufacturing Technology II; Machine Tools & Metrology, Machining Science; Theory of Metal Cutting, Precision Engg., Tool Design
  • Added a few laboratory equipemnt and research equipment both at UG and PG level in the Metrology Laboratory and Production Engineering Laboratory from the Instirute Plan Grants, TEQIP Grants and Research Project Grants.
  • Set-up of Precision Metrology Lab and preparation of its manual
  • Preparation of Manufacturing Laboratory manual
  • Developed teaching aids for Metal cutting, Tool Design and Machine Tools courses.

Courses Handled:

U.G. Theory

U. G. Laboratory

  • Manufacturing Technology-II
  • Tool Design
  • Mechanical Measurements and Metrology
  • Fluid Power Systems
  • Machine Design
  • Basic Mechanical Engineering
  • Engineering Graphics
  • Machine Drawing
  • Machine Tools and Metrology
  • Fluid Power Systems Lab
  • AutoCAD Lab
  • CAD Lab
  • Workshop Practice

P.G. Theory

P. G. Laboratory

  • Theory of Metal Cutting
  • Machine Tool Design and Analysis
  • Computer Control of Manufacturing Systems
  • Fluid Power Systems
  • Manufacturing Lab
  • Fluid Power Systems Lab

 

Additional Responsibilities:

Department Level

  1. Head, Production Engineering Section, Department of Mechanical Engineering, since Aug.2013.
  2. Coordinator, Ph.D. programme, Mechanical Department, 2011-2013.
  3. Member, Board of Studies, Mechanical Department, 2010-2011.
  4. In-Charge, Metrology Lab, 1996-2000 and 2003-2008.
  5. In-Charge, TEQIP for the Department of Mechanical Engineering, 2005-06.
    • Added 4 Component and 6 Component Dynamometers (Piezo-Electric quartz type) to the Production Engineering Lab. (used by UG, PG and Research students extensively in the regular laboratory classes as well as for Project works),

 6.  Time Table In-charge for Mech. Engg. Dept. 2004 - 2005.

Institute Level

  1. Associate Dean, Faculty Welfare since June 2013
  2. Associate Dean, Students Welfare during Dec.2012 to May 2013
  3. Member, Departmental Purchase Committee, Central Stores, since 2012
  4. In-Charge, Training and Placement, NIT Warangal, 2006 - 2010
    • Developed and implemented online web portal with the help of a CSE student for the management of placement activities
    • Organized a number of workshops for UG/PG students to impart Soft Skills, Interview Facing Skills and Team Building Skills by inviting subject experts from leading industries
    • MOU with Accenture for offering ERP as elective course for III/IV B.Tech. students, which was offered during 2008-2010, for two academic years
  5. Convener / Member, Academic Committee for the Convocations (I to XI), 2003 to 2013.
  6. Warden, NIT Hostels from 2004 to 2006
  7. Member, Academic Reforms Committee, NIT Warangal: 2005
  8. Staff Advisor, Photography Club, 1995-1999

Conferences/STTP/ Seminars/Workshops/Training Programmes Organized:

  1. One day workshop on "New Pradigms in Manufacturing", Self Financed, 30th May 2013.
  2. One Day Workshop on "Creativity and Innovation", sponsored by TEQIP, NIT Warangal, March 2013.
  3. A Workshop on "Introduction to Research Methodologies", Sponsored by ISTE, 24th June to 4th July 2012.
  4. National Conference on "Factory Automation, Robotics and Soft Computing", NIT Warangal, Dec. 2009
  5. One Day Workshop on "Development of Cutting Tool Technologies and its Relevance to the Indian Industry", Self Financed, March 2009. 

Conferences/STTP/ Seminars/Workshops/Training Programs Attended:

  1. Workshop on Innovations in Materials and Processing and Transfer of Technology to the Industry", NIT Warangal, 17-19, Oct. 2013.
  2. NMEICT Workshop on Pedagogy Projects, IIT Kharagpur, 4-5, July 2013.
  3. Management Development Program for NIT Warangal, ISB - Hyderabad, 25-26, June 2013
  4. Creativity & Innovation Management in Research, DST Sponsored Program, ESCI - Hyderabad, 4-8, Feb 2013
  5. Akash for Education, NMEICT & NIT Warangal, 10-11, Nov. 2012
  6. Management Capacity Development Training Program, MDI - Gurgaon, 1-6, Dec. 2008
  7. Micro Machining (QIP Short Term Course), IIT Kanpur, 25-29, Oct. 2005
  8. Optimization Methods for Engineering Design by S.S.Rao, GITAM - Visakhaptnam, 5-10, July 2004
  9. Web Design and Development (QIP Program), IIT Delhi, 10-15, Dec. 2001
  10. Advanced Manufactruning Technology (SERC School), IIT Delhi, 2-14, Nov. 1998
  11. Systems Approach to CIM (ISTE Program), REC Warangal, 28th Dec. 1998 to 8th Jan 1999.
  12. Total Quality Management (ISTE Program), REC Warangal, 29th May to 9th June 1995
  13. Micropocessor Applications in Mechanical Engineering (ISTE Program), REC Warangal, 23rd May to 4th June 1994
  14. Geometric Modelling for CAD, IISc Bangalore, 2-13, Aug 1993.
  15. Computer Aided Process Planning (ISTE Program), REC Warangal, 24t May to 4th June 1993
  16. Faculty Development Program, REC Warangal, 23-27, Nov. 1992

Expert Lectures Delivered at Various STTP/FDP/Seminars/Workshops:

  1. Advances in Cutting Tool Materials, CR Reddy College of Engineering, Eluru, Dec. 2012
  2. Preparing for Campus Interviews, Finishing School, NIT Warangal, Dec. 2012
  3. Recent Advances in Machining - A New Perspective, DRDO, Jagadalpur, Oct. 2012
  4. Road Map for Campus Interviews, Finishing School, NIT Warangal, May 2008
  5. How to be Successful, Finishing School, NIT Warangal, May 2007
  6. Modeling and Optimization of Metal Cutting Processes, NIT Warangal, March 2004.
  7. Precision Machining- Ceramic Grindng: A Review, 3rd SERC School, IIT Kanpur, June 2002
  8. Quality Circles, NIT Warangal, May 1995

Honors/Awards:

  1. Certificate of appreciation from CMTI Bangalore for the industrial relevance of one of my Ph.D. work publications.
  2. Best paper award, International Conference on Mechanical and Industrial Engineering, ICMIE-2012, Jan. 2012, Guwahati.
  3. First rank in B.Tech. in a class of 60 students, KL College of Engineering, Nagarjuna University.

Countries visited:

  • San Deigo, California, USA: To present a paper in "ASME-2013, International Mechanical Engineering Congress & Exposition", 15-21, Nov. 2013
  • Singapore: To present a paper in 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies, 26-28, Feb 2011
  • Dubai:To present a paper in International Conference on Trends in Industrial and Mechanical Engineering (ICTIME 2012), 24-25, March 2012 

Memberships in Professional Bodies:

  • Life Member, Indian Society for Technical Education LM 12639

Reviewer:

  • International Journal of Advanced Manufacturing Technology
  • International Journal of Manufacturing Technology and Management
  • AIMTDR Conference
  • COPEN Conference

Any other Information:

1. Honorary Chairman (since 2012) for The Lakshya Foundation, an NITW Alumni led organization.

2. Member, Board of Studies:

  • JNTU Hyderabad
  • JNTU Kakinada
  • GMR Institute of Technology, Rajam
  • PVP Siddhartha Institute of Science and Technology, Vijayawada
  • Bapatla College of Engineering, Bapatla

3. Ph.D. Examiner:

  • MNIT Allahabad
  • Andhra University, Visakhapatnam
  • Anna University, Chennai
  • SRM University, Chennai
  • JNTU Hyderabad
  • JNTU Kakinada
  • JNTU Anantapuram

4. Technical Sessions chaired:

  • International Conference on Trends in Industrial and Mechanical Engineering (ICTIME 2012), Dubai, March 2012
  • 1st International and 22nd AIMTDR Conference, Dec.2006, IIT Roorkee.
  • National Conference on Recent Advances in Mechanical Engineering July 2011, RVR JC College of Engineering, Guntur.

Profile updated in Nov. 2013