DR. SURYA PRAKASH RAO CH

Professor (HAG)

Department of Mechanical Engineering

National Institute of Technology, Warangal - 506004, Telangana, INDIA

: cspr@nitw.ac.in

: 08702462302

Interests:

Specializations


 Manufacturing: include CAD/CAM, CIM, Modeling & Simulation, Evolutionary Computation, Metal Cutting and Metal-Matrix Composites.

 

Message


 

 

 

 

Course Taught Previously


 

S.No

Subject

PG Courses

1.       

Computer control of Manufacturing Systems

 

 

For M.Tech (CIM) And

 

M.Tech ( MSE)

 

2.       

Flexible Automated Manufacturing

3.       

CNC Machines and Robotics

4.       

Mechatronics

5.       

Systems Approach to CIM

6.       

Simulation Modeling and Performance Evaluation

 

 

UG Courses

  1.  

Fundamentals of CAD/CAM

For B.Tech. (Mech.)

  1.  

Engineering Drawing

  1.  

Machine Tools

  1.  

Mechatronics

 

Courses Currently Being Taught


S.No

Subject

PG Courses

  1.  

Soft Computing Tools

For M.Tech (CIM) And

M.Tech ( MSE)

 

 

UG Courses

  1.  

Mechatronics

For B.Tech. (Mech.)

  1.  

Engineering Drawing

 

 

Journal Publication Details


International Journals

  1. G.B. Veeresh Kumar, C.S.P. Rao and N. Selvaraj, Synthesis and Property Evaluation of Al7075-Al2O3 Composites  International Conference on Smart Technologies for Materials, Communication, Controls, Computing and Energy, (ICST 2011), January 05-07, 2011.
  1. G.B. Veeresh Kumar, C.S.P. Rao and N. Selvaraj, Mechanical and dry sliding wear behaviors of Al7075 alloy-reinforced with SiC particles International Journal of Composite Materials, 2011.
  2. G.B. Veeresh Kumar, C.S.P. Rao and N. Selvaraj, Mechanical and Tribological Behavior of Particulate Reinforced Aluminium Metal Matrix Composites a review Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No.1, pp.59-91, 2010.
  3. V. Mahesh, C.S.P. Rao, Theoretical Analysis on Powers of-two Applied to JSP A Case Study of Turbine Manufacturing, Accepted for publication in International Journal of Green Computing. (Manuscript IJGC-2-2-11-1)
  4. M. Hymavathi, S K Mishra, CSP Rao, Design of Hybrid Particle Swarm Optimization Algorithm for solving Job Shop Scheduling Problem, Accepted for publication in International Journal of Applied Management and Technology.
  5. L.Siva Rama Krishna, Sandeep Dulluri, G.Rangajanardhan and C. S. P. Rao, Development of an Online Inventory Lot-sizing Integrated with Supplier Selection System for a multi-product manufacturing Industry, Accepted for publication in International Journal of Applied Management and Technology.
  6. L.Siva Rama Krishna, V Mahesh, Sandeep Dulluri, and C. S. P. Rao, Implementation of an online scheduling support system in a high mix manufacturing firm, International Journal of Engineering, Science and Technology, Vol. 2, No. 11, 2010, pp. 90-103.
  7. Effect of SiC Reinforcement in Al6061 Alloy, International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences (IJ-ETA-ETS) Volume 3, Issue 1, pp.--------, Jan 2010 - June 2010 (Article In Press).
  8. A CAD System for Extraction of Mating Features in an Assembly Assembly Automation (in press).
  9. A Novel Method of using API to Generate Liaison Relationships from an Assembly, Journal of Software Engineering and Applications. (In Press.)
  10. Prediction of Wear of Al6061-SiC Metal Matrix Composites using Artificial Neural Networks, International Journal of Computer Applications in Engineering, Technology and Sciences (IJ-CA-ETS) Volume 2, Issue 1, pp. 498-505, October 2009 March 2010.
  11. Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites, Journal of Minerals & Materials Characterization & Engineering, (JMMCE), USA, Volume 9, no.1, pp.47-59, 2009.
  12. Experimental Studies on Physical and Wear Behavior of Al6061-SiC Composites, An International Research Journal of Material Sciences (Material Science Research India) volume 06, no-2, pp. 531-536, December 2009.
  13. Algorithms for the design feature data extraction from DXF files, International Journal of Applied Engineering Research (IJAER), Vol 4, No 7, PP 1185-1195, 2009.
  14. Application of ant colony, genetic algorithm and data mining-based techniques for scheduling, Robotics and Computer-Integrated Manufacturing, Volume 25, Issue 6, December 2009, pp. 901-908.
  15. A New CAD Schema for Assembly Sequence Planning, International Journal of Design and Manufacturing Technologies, Vol 3, No.2, pp. 43-47, 2009.
  16. Integration of Feature recognition and Process Planning using VRML and Petri Nets, International journal for manufacturing science and production, Vol.10, No.2, 2009 pp. 75- 90.
  17. A real time web integrated scheduling support system for a multi product manufacturing industry International Journal of the computer, the Internet and management, Vol 17, No. 2, 2009, pp.55 68.
  18. A novel approach for extraction of design features using DXF files, International Journal of Applied Management and Technology (IJAMT), Vol 7, No 1, pp 122-132, April 2009.
  19. Parametric Modelling and Simulation of Rapid Prototyping, International Journal of Rapid Manufacturing, 1 (1), 2009, pp. 65-87.
  20. A heuristic for priority based scheduling in a turbine manufacturing job-shop International Journal of Industrial Systems and Engineering, Volume 3, No 6,PP: 625 643, 2008
  21. A Robust Process Optimization for Fused Deposition Modeling, International Journal of Manufacturing Technology and Management, 14(1/2), 2008, pp. 228-245.
  22. A Genetic Algorithm Approach for Simultaneous Tolerance Synthesis for Manufacturing and Quality with Different Stack-Up Conditions, International Journal of Applied Engineering Research, Volume 3, Number 9 (2008), pp.11691188.
  23. Recognition of Machining Features and Optimum Process Plan Generation using Genetic Algorithms, International Journal of Manufacturing Science and Production, Vol.9, No.3-4, 2008, pp.145-159.
  24. Machining Feature Recognition and Process Plan Generation for Prismatic Parts International Journal of Scientific Computing, Vol.2, No.2, 2008, pp.129-143.
  25. Optimization of cam-follower motion using B-splines International Journal of Computer Integrated Manufacturing, 2008, pp.1-9.
  26. Consignment stock policy using Genetic Algorithm for effective inventory management in supply chains International Journal of Services Operations and Informatics 2008 - Vol. 3, No.2  pp. 107- 126.
  27. A robust process optimization for fused deposition modeling, International Journal of Manufacturing Technology and Management 2008 - Vol. 14, No.1/2, pp. 228 - 245.
  28. Consignment stock policy with controllable lead times for effective I inventory management in supply chains International Journal of Manufacturing Technology and Management. Vol.10, No.2/3, pp.161-176, 2007.
  29. Optimization of supply chains for single vendor-multi buyer consignment stock policy under controllable lead time using genetic algorithm International Journal of Manufacturing Research, Volume 2, No. 2, pp 243 262, 2007.
  30. Cell formation and performance evaluation of cellular layouts using GGA and simulation, International Journal of Factory Automation, Robotics and Soft Computing, Vol. 1, No. 1, pp 21-27, 2007.
  31. A hybrid Grouping Genetic Algorithms for cell formation with alternative Part routings and Multiple Machines, International Journal for Manufacturing Science and Technology, Vol. 9, No. 1, pp 119, 2007.
  32. Grouping Genetic Algorithm for cell formation problem, International Journal for Manufacturing Science and Technology, Vol. 9, No. 2, pp 11-20, 2007.
  33. Multi Objective Optimization for Job Shop Scheduling using Sheep Flocks Heredity Model Algorithm, International Journal for Manufacturing Science and Technology, Vol.9, No.2, pp.47-54, 2007.
  34. A Modified GA Approach for Simultaneous Scheduling of Machines and AGVs in FMS, International Journal for Manufacturing Science and Technology, Vol.8, No.1, pp.59-68. 2006.  
  35. Design optimization and manufacturing of plate cams using Nurbs, International Journal for Manufacturing Science and Technology. Vol.8, No.1, PP.45-58, 2006.
  36. A Hybrid Multi Objective GA for Simultaneous Scheduling of Machines and AGVs in FMS, International Journal of Advanced Manufacturing Technology, March/April 2006.
  37. An Optimization Simulation Approach for Performance Evaluation of Cellular Layouts, WSEAS Transactions on Business and Economics (accepted for publication, 2006).
  38. Simulation Modeling and Performance Evaluation of AGV based Material Handling System, WSEAS Transactions on Business and Economics, Vol.2, No.2, pp.30-36, 2005.
  39. Simulation of machine breakdown in a pull production system operated by various control mechanisms, Modeling and simulation, IASTED publication ACTA Press, USA (ISBNo. 88986-391) 2004).

 National Journals

  1. Mechanical and Tribological Behavior of Al7075-Al2O3 Composites, Journal of Manufacturing Engineering, Volume4, Issue 2, 2009.
  2. An Integrated Decision making Framework for Modern Manufacturing, ICFAI University Journal of Operations Management, Vol. 8, No. 3 & 4, pp. 7-20, November 2009
  3. Web Integrated Decision support system for machine scheduling and inventory management, ICFAI University Journal of Operations Management, Vol. 8, No. 1, pp. 35-52, February 2009
  4. Powers of two based heuristic for job-shop scheduling, ICFAI Journal of Operations Management, 2008.
  5. Simultaneous Scheduling of Machines and Material Handling System in a Flexible Manufacturing Environment using Differential Evolution Approach" ICFAI Journal of Operations Management, Vol.7, No.3, pp.46 63, 2008.
  6. "Scheduling with processing alternatives An approach to minimize make-span in a multi-product manufacturing industry", ICFAI Journal of Operations Management, Volume VII, No 4 PP: 31 44, November, 2008.
  7. A Design of Experimental Approach to Determine the Effect of Process Parameters on Strength of SLS Parts, Manufacturing Technology Today, 6(2), February 2007, pp. 20-24.
  8.  Form Errors  Minimization in Fused Deposition Modeling using Taguchi Technique,   Manufacturing Technology Today, 5(9), September 2006, pp. 10-14.
  1. A design of experimental approach to determine the effect of process parameters on strength of SLS parts. Manufacturing technology today, NICMAP (CMTI-Bangalore).
  2. Drilling of Titanium clad steel plate, Institution of Engineering, Production Engineering Journal, Sept./Oct. 1991.

 

Conference Proceeding


International Conferences

  1. Design of Hybrid Particle Swarm Optimization Algorithm for solving Job Shop Scheduling Problem, third international and twenty fourth ALL INDIA MANUFACTURING TECHNOLOGY,DESIGN AND RESEARCH CONFERENCE, DEC 13-15, 2010, Andhra university, vishakapatnam, vol-2, pgno.603to608
  2. Design and fabrication of smart panel boards external plate by integrating CAD& DFMA methodology, third international and twenty fourth ALL INDIA MANUFACTURING TECHNOLOGY,DESIGN AND RESEARCH CONFERENCE,DEC 13-15,2010,Andhra university, vishakapatnam, vol-2, pgno.603to608
  3. Influence of cutting parameters for optimum surface roughness while turning MDN350 steel, Third international and twenty fourth ALL INDIA MANUFACTURING TECHNOLOGY,DESIGN AND RESEARCH CONFERENCE,DEC 13-15,2010,Andhra university, vishakapatnam, , pgno.229 to 234
  4. Evaluation of process parameters for optimum surface finish while turning nimonic-75 using ceramic tool, Third international and twenty fourth ALL INDIA MANUFACTURING TECHNOLOGY,DESIGN AND RESEARCH CONFERENCE,DEC 13-15,2010,Andhra university, vishakapatnam, , pg.no 235 to 240
  5. Assessment of Wear Resistance of Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites using Wear Endurance Index, International Conference on Materials, Mechanics and Management (IMMM2010), 14th to 16th, January, 2010, at College of Engineering Trivandrum, Tiruvananthapuram, Kerala.
  6.  Studies on Physical & Tribological Properties of Al6061-SiC Composites, proceedings ofan International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009) 19th to 21st Nov 2009.
  7. Development of an Online Supplier Selection System for a Turbine Manufacturing Company, 19th International Conference on Flexible Automation and Intelligent Manufacturing (2009 FAIM), July 6-8, 2009.
  8. A CAD System for Extraction of Mating Features in an Assembly, 19th International Conference on Flexible Automation and Intelligent Manufacturing (2009 FAIM), July 6-8, 2009.
  9. Evaluating Residual Life using Failure History of a Machine Tool, 19th International Conference on Flexible Automation and Intelligent Manufacturing (2009 FAIM), July 6-8, 2009.
  10. Mechanical and Tribological Behavior of Al7075-Al2O3 Composites, International Conference on Recent Advances in Materials Processing Technology (RAMPT€™09), National Engineering College, K.R. Nagar, Kovilpatti, Tamil Nadu, India, February 25 27, 2009.
  11.  Optimal process plan generation for the rotational components having form features using genetic algorithms, International Conference on Computational Methods in Engineering Science (CMES), CBIT, Hyderabad, January, 2009.
  12.  A novel approach for identifying turning features from STEP file, 2nd International and 23rd AIMTDR Conference, IIT, Chennai.Vol.2, December 2008.
  13. Differential Evolution approach for scheduling of flexible manufacturing systems, 2nd International and 23rd AIMTDR Conference, IIT, Chennai.Vol.2, December 2008.
  14. Mechanical and Tribological Behaviour of Al6061-SiCp Composites, International Conference on Recent Trends in Materials and Mechanical Engineering (ICMM2008), Dr.Mahalingam College of Engineering and Technology, Pollachi, Tamil Nadu, India, 18 - 20 December 2008.
  15. Mechanical Properties of Particulate Reinforced (Al6061-Al2O3p and Al7075-SiCp) Composites, International Conference on Micro Electro Mechanical Systems (MEMS - 08), Engineering College, Bhatkal, Karnataka, India, 22 23rd October 2008.
  16. A precision athletic track making system using CAD, 16th Biannian Conference International society for comparative physical education and sports (ISCPES), Pre Olympic Scientific Congress 2008, University of Macan China, 23rd 26th July 08.
  17.  A novel approach for recognizing the milling features using STEP file International Conference on FAIM 2008, Skovde, Sweden, 30th June to 2nd July.
  18. Rapid Product development using virtual prototyping Technologies, International Conference on FAIM 2008, Skovde, Sweden, 30th June to 2nd July.
  1. A Web Integrated Manufacturing for Turned components using SinuTrain and AutoCAD International Conference on FAIM 2008, Skovde, Sweden, 30th June to 2nd July.
  2. A Modeling system for Automated Mechanical Assembly sequence planning International Seminar on Modeling, Simulation and Manufacturing Systems - 08, Andhra University, Vishakhapatnam 29th to 30th June 2008.
  3. A Novel Approach for Identifying Holes on Cylindrical Surface using STEP file International Seminar on Modeling, Simulation and Manufacturing Systems - 08, Andhra University, Vishakhapatnam 29th to 30th June 2008.
  4. Modeling of 3D prismatic part using STEP data Exchange Standard TEAMTECH 2007, IISc Bangalore, 4-6 oct 2007.
  5. Design And Manufacturing of Cams on Interoperable CNC TEAMTECH 2007, IISc Bangalore, 4-6 oct 2007.
  6. Modelling and Optimization of Selective Laser Sintering Process, International Conference on Total Engineering, Analysis &  Manufacturing Technologies (TEAMTECH 2007), Indian Institute of Science (IISc), Bangalore, India, October 4 6, 2007
  7. An Analysis of XML and STEP as data exchange models in Modern Manufacturing International Conference on Advanced Design and Manufacturing (ICADM-2007). August 2007 at Sethu Institute of Technology, Kariapatti, Tamilnadu.
  8. Development of Shop-floor Programming System for Integration of CAD/CAM and CNC International Conference on Advanced Design and Manufacturing, Sethu Institute of Technology, Aug. 9-11, 2007, Madurai.
  9. Optimization of single vendor multi buyer consignment stock supply chains using controllable lead times using Evolutionary Algorithms 17th International conference on FAIM, 18-20, June 2007, Philadelphia, USA.
  10. Optimization of CAM-follower motion by using B-Spline polynomials. 17th International conference on FAIM, 18-20, June 2007, Philadelphia, USA.
  11. Multi objective Optimization of Cellular layouts in CMS environment, 17th International conference on Flexible Automation & Intelligent Manufacturing, 18-20, June 2007, Philadelphia, USA
  12. Determination of optimum process parameters using Taguchi€™s approach to improve the quality of SLS parts, 17th IASTED international conference on modeling and simulation (MS 2006), Montreal, Canada, May 2006.
  13. Integration of process planning and scheduling in a multi product manufacturing system, Communicated to 22nd International Conference on CAD/CAM, Robotics and Factories of the future, during July 19-22, 2006 organized by ISPE & Department of Mechanical Engineering, VIT, Vellore, Tamilnadu.
  14. A Design of Experimental Approach to Determine the Effect of Process Parameters on Accuracy of SLS Parts, International Conference on Total Engineering, Analysis & Manufacturing Technologies (TEAMTECH 2006), Indian Institute of Science (IISc), Bangalore, India, cd. (RP7.pdf), Feb.28 March 2, 2006
  15. A Study on Strength of the Parts Made by Selective Laser Sintering Process, 22nd International Conference on CAD/CAM, Robotics and Factory of the Future (CARS & FOF 2006), Vellore Institute of Technology, Vellore, India, pp. 248257, July 1922, 2006.
  16. Determination of Optimum Process Parameters using Taguchi€™s Approach to Improve the Quality of SLS Parts, 17th IASTED International Conference on Modeling and Simulation (MS 2006), Montreal, Canada, pp. 228233, May 2426, 2006.
  17. Analysis of contact stresses in plate CAMS and optimization of CAM size Communicated to 22nd International Conference on CAD/CAM, Robotics and Factories of the future, during July 19-22, 2006 organized by ISPE & Department of Mechanical Engineering, VIT, Vellore, Tamilnadu.
  18. Improvement in motion characteristics of CAM follower systems using NURBS Communicated to 22nd International Conference on CAD/CAM, Robotics and Factories of the future, during July 19-22, 2006 organized by ISPE & Department of Mechanical Engineering, VIT, Vellore, Tamilnadu.
  19. Synthesis of cam profiles using NURBS, International conference on Agile manufacturing, Virginia, USA, July 19-20, 2006.
  20. Design optimization and analysis of plate CAMS 17th IASTED International conference on modeling and simulation, Canada, May 24-26, 2006.
  21. Optimization, Simulation and Performance Evaluation of Cellular Layouts, International Conference on Systemics, Cybernetics and Informatics, ICSCI-2004, February 12-15, 2004, Hyderabad.
  22. Multi Objective Optimization in Simultaneous Scheduling of Machines and AGVs in Automated Manufacturing Systems, International Conference on Systemics, Cybernetics and Informatics, Hyderabad, February 2004.
  23. Simulation of Supply Chains under uncertainty inventory levels 33rd International Conference on Computers & Industrial Engineering, Jeju, South Korea during 25th 27th March 2004.
  24. An Improved consignment stock policy with stochastic lead times for effective inventory management in supply chains at 2004 International conference on Engineering Management organizing by IEEE during 18th to 21st October 2004 at Singapore.
  25. Activity Based Integrated Scheduling System for A Multi Product Manufacturing Industry, International Conference on Modeling and Simulation (MS 2003), Palm Springs, USA from February 24th to 26th, 2003.
  26. Performance Evaluation of CONWIP Control System using Closed Queuing Network, National Conference on Advances in Manufacturing System 2003, Jadavpur University, Kolkata, March 28 29, 2003.
  27. Simulation Analysis of Hybrid Control Mechanisms in a Pull Type Production System, accepted for publication in 17th International Conference on Production Research, Virginia Tech. University, Blacks Burg, August 3-7, 2003.
  28. Multi-objective Optimization in Simultaneous Scheduling of Machines and AGVs in an Automated Manufacturing System, accepted for publication in 17th International Conference on Production Research, Virginia Tech. University, Blacks Burg, August 3-7, 2003.
  29. Modeling and Analysis of Extended Kanban control System using Closed Queuing Network, 32nd International Conference of Computer and Industrial Engineering, University of Limerick, Ireland, 2003.
  30. Bottle neck analysis of manufacturing systems through analytical and simulation modeling 35th, CIRP International seminar on manufacturing systems, South Korea, 13-16 May, 2002.
  31. A Comparative analysis of hybrid pull production control mechanisms, International conference on Responsive manufacturing, Gaziantep, Turkey, June, 26-28, 2002.
  32. Design and Develop of a Database Oriented Scheduling System for A Multi Product Manufacturing Industry, published in the proceedings of the 2nd International Conference on Responsive Manufacturing, Gazientep, Turkey from 26-28 June, 2002.
  33. Performance analysis of SEKCS and IEKCS for a multiline- multistage assembly manufacturing system, International conference on Computers and Industrial Engineering, Tinos island, Aegen sea, Greece. June 29-July 2, 2002.
  34. A Comparative Analysis of Hybrid Pull Production Control Mechanisms International Conference on Responsive Manufacturing Turkey, June 2729, 2002.
  35. Database Oriented Scheduling System for Heavy Engineering Industry International Conference on Responsive Manufacturing Turkey, June 2729, 2002.
  36. A Web Integrated Scheduling Support System for Multi Product Manufacturing Industry 30th International Conference on Computers and Industrial Engineering Greece, 29th June 2nd July 2002.
  37. Performance Analysis of SEKCS and IEKCS for a Multiline Multistage Assembly Manufacturing System 30th International Conference on Computers and Industrial Engineering Greece, 29th June 2nd July 2002.
  38. A Modified Genetic Algorithm Approach for Scheduling of Machine and AGVs in an Automated Manufacturing System 30th International Conference on Computers and Industrial Engineering Greece, 29th June 2nd July 2002.
  39. Lagrangian relaxation approach for scheduling of MultiClass manufacturing systems, IEEE International conference on methods and models in automation and robotics, Poland, 21-23, September, 2002.
  40. Development of Web based Plant Maintenance Management system in a Computer Integrated Manufacturing Environment International Conference on E-Manufacturing, MANIT, Bhopal, INDIA, 17th Nov.-19th Nov. 2002.
  41. Web Integrated Inventory and Machine Scheduling Decision Support System, International Conference on E-Manufacturing, MANIT, Bhopal, INDIA, 17th Nov.-19th Nov., 2002.
  42. Machine Scheduling by Lagrangian Relaxation Technique with Earliest Penalty, International Conference on E-Manufacturing, MANIT, Bhopal, INDIA, 17th Nov.-19th Nov. 2002.
  43. Scheduling of multi-class manufacturing systems using simulated annealing and Lagrangian relaxation technique, International Conference on Asia Pacific Industrial Engineering and management system, Taipei, Taiwan, December 18-20, 2002.
  44. Effect of Gamma in Lagrangian Relaxation Technique for machine scheduling. International Conference on operations research for development (ICORD) Anna Univ., Chennai during 27-30, December 2002.
  45. Supply chain modeling with uncertainty in demand and supply using fuzzy logic, International Conference on operations research for development (ICORD), Anna Univ., Chennai during 27-30, December 2002.
  46. Simulation analysis of pull production system with machine breakdown, The forth Asia-pacific conference on Industrial engineering and management system, Taipei, Taiwan, R.O.C, Dec 18-20, 2002.
  47. Performance Modeling of Automated Manufacturing Systems by Simulation Optimization, 7th IEEE International Conference on Methods and Models in Automation and Robotics , 28 30th August 2001, Miedzyzdroje, Poland.
  48. Simulation studies on unbalancing methods in JIT production system with variable operation times using SLAM II, International conference on Logistic and supply chain management, PSG College of technology, Coimbatore, August, 6-8, 2001.
  49. Simulation Optimization in Job shop Scheduling Through Evolutionary Algorithms A Case Study, Proceeding of the 1st International Conference on Logistic Supply Chain Management, PSG College of technology, Coimbatore, 6-8th August, 2001.
  50. A Genetic Algorithm for Facility Layout Design, Proceeding of the 1st International Conference on Logistic Supply Chain Management, PSG College of technology, Coimbatore 6-8th August, 2001.
  51. Capacity utilization and scheduling using Lagrangian relaxation technique a case study International conference on SCMIS€™2001, Hong Kong, 17-19 December, 2001.
  52. Capacity utilization by identification of bottleneck A case study, International Conference on Intelligent Flexible Autonomous Manufacturing Systems, CIT, Coimbatore, 1012, January 2000.
  53. The performance analysis of multistage and multilane production system in JIT environment, International conference on CAD/CAM, Robotics and Factories of the future, Trinidad and Tobago, West Indies, June, 26-28, 2000.
  54. A Dynamics Programming Approach for Simultaneous and Routing in an FMS, 16th International Conference on CAD/CAM, Robotics and Factories of the future, Trinidad, June 2000.
  55. A Distributed Database management System Approach for Generating Activity Schedules for a Multi-Component Manufacturing Environment, Forum on Management Challenges, Pokhara, Nepal, August 2022, 2000.
  56. Assimilation of E-Commerce with Production Planning and Control - A perspective Forum on Management Challenges, Pokhara, Nepal, August 2022, 2000.
  57. A Simulation of Automated Guided Vehicle-Based Material Handling Systems for Flexible Manufacturing Systems Forum on Management Challenges, Pokhara, Nepal, Aug. 2022, 2000.
  58. Computer Aided Facility Layout Design for Cellular Manufacturing, International Conference on Issues in Management, Pokhran, Nepal, September 2000.
  59. Simultaneous Scheduling of Machines and Material Handling System in an FMS, Second International Conference on Advanced Manufacturing Technology, Malaysia, August 2000.
  60. Simulation studies on Just-in-time Manufacturing System, International Conference on Manufacturing Technology beyond 2000, Bangalore by Indian National Academy of Engineers and BEML, during 1719 November 1999.
  61. A simulation study of JIT system using SLAM II, International seminar manufacturing technology beyond 2000, Bangalore, INDIA, Nov 17-19, 1999.
  62. Job Shop Scheduling using Timed Petri Nets and Heuristic Search, 23rd International Conference on Computers and Industrial Engineering, March 29 April 1, 1998, Chicago, Illinois.
  63. An application of Genetic Algorithm for the Single machine Total Weighted Tardiness problem, 23rd International Conference on Computers and Industrial Engineering, March 29April 1, 1998, Chicago, Illinois.
  64. Scheduling of Manufacturing Systems using Timed Petri Nets and Penalty Coefficient based heuristic search, C.I.R.P Int. symposium on Advanced Design and Manufacture in the global Manufacturing Era, August 21-22, 1997, Hong Kong.
  65. Modeling of aerofoil surfaces with ration B-splines using open uniform and non-uniform knot vectors, International Conference on CAD/CAM, Robotics and Factories of future, Middlesex Univ., 1996.
  66. Modeling and analysis of Kanban systems using Generalized Stochastic Petri Nets, International Conference on CAD/CAM, Robotics and Factories of future, Middlesex Unit., 1996.
  67. Scheduling of FMS using Timed Petri Net, International Conference on Automation (ICAUTO, 95), Indore during, Dec., 12-14, 1995.
  68. A Petri Net based analysis of automated storage and retrieval system, Proceedings of Int. Conference on Computer Integrated Manufacturing, Singapore, July 14-17, 1994.
  69. Tool wear monitoring in drilling using Fuzzy, C-means algorithm, published in the proceedings of Int. Conference on advanced manufacturing systems, Johar Bahru, Malaysia, August 30-31, 1994.
  70. Computer aided design of die set for hot forged spur gears a parametric approach, Intl. Conference on CAD/CAM and Robotics and Factory Automation, IIT, Delhi, Dec. 1993.
  71. Software for Generation of Part Programs for Machining Plate cams, International Conference on Information systems, China, Oct. 1991.

 National Conferences

  1. M. Hymavathi, S K Mishra, CSP Rao, Design of Hybrid Particle Swarm Optimization Algorithm for solving Job Shop Scheduling Problem, third international and twenty fourth ALL INDIA MANUFACTURING TECHNOLOGY,DESIGN AND RESEARCH CONFERENCE, DEC 13-15, 2010, Andhra University, Vishakapatnam, vol-2, pgno.603to608
  2. P. Subhash Chandra Bose, C.S.P Rao, santhosh ram, Design and fabrication of smart panel boards external plate by integrating CAD& DFMA methodology, third international and twenty fourth ALL INDIA MANUFACTURING TECHNOLOGY,DESIGN AND RESEARCH CONFERENCE,DEC 13-15,2010, Andhra University, Vishakapatnam, vol-2, pgno.603to608
  3. P. Subhash Chandra Bose, C.S.P Rao, Jeevan, Influence of cutting parameters for optimum surface roughness while turning MDN350 steel, Third international and twenty fourth ALL INDIA MANUFACTURING TECHNOLOGY,DESIGN AND RESEARCH CONFERENCE,DEC 13-15,2010, Andhra University, Vishakapatnam, pgno.229 to 234
  4. P. Subhash Chandra Bose, C.S.P Rao, Venkatesh, Evalution of process parameters for optimum surface finish while turning nimonic-75 using ceramic tool, Third international and twenty fourth ALL INDIA MANUFACTURING TECHNOLOGY,DESIGN AND RESEARCH CONFERENCE,DEC 13-15,2010, Andhra University, Vishakapatnam , pgno 235 to 240
  5. Health monitoring using wearable biosensors, National Conference on Recent Advances in Manufacturing Technologies, pp.90-96, 9th10th January 2010, GIET, Gunpur, Orissa.
  6. A hybrid PSO approach for job shop scheduling problems, National Conference on Recent Advances in Manufacturing Technologies, pp.97-103, 9th10th January 2010, GIET, Gunpur, Orissa.
  7. Application of memetic algorithms for job shop scheduling problems, National Conference on Recent Advances in Manufacturing Technologies, pp.104-112, 9th10th January 2010, GIET, Gunpur, Orissa.
  8. Solving uncapacitated multi level multi item lot sizing using metaheuristics, National Conference on Recent Advances in Manufacturing Technologies, pp.134-138, 9th10th January 2010, GIET, Gunpur, Orissa.
  9. Availability and performance assessment of machine tools through failure intensity analysis, National Conference on Recent Advances in Manufacturing Technologies, pp.139-147, 9th10th January 2010, GIET, Gunpur, Orissa.
  10. A data model for new methodology of manufacturing using STEP-NC, National Conference on Recent Advances in Manufacturing Technologies, pp.166-173, 9th10th January 2010, GIET, Gunpur, Orissa.
  11. Integrating parts and assembly modeling for assembly sequence generation, National Conference on Recent Advances in Manufacturing Technologies, pp.255-263, 9th10th January 2010, GIET, Gunpur, Orissa.
  12.  "Optimum Selection of Process Plans Using Ant Colony Algorithm", National Conference on Robotics and Intelligent Manufacturing Process, BHEL Corporate R&D Division, Hyderabad, 5th 6th, Jan, 2009.
  13.  "Particle Swarm Optimization Approach for Scheduling of Job Shops", National Conference on Robotics and Intelligent Manufacturing Process BHEL Corporate R&D Division, Hyderabad, 5th 6th, Jan, 2009.
  14.  "A STEP based feature recognition system for Turned Components", National Conference on Robotics and Intelligent Manufacturing Process BHEL Corporate R&D Division, Hyderabad, 5th 6th, Jan, 2009.
  15.  Development of A Geometric Modeling System for Automated Assembly Planning, National Conference on Robotics and Intelligent Manufacturing Process BHEL Corporate R&D Division, Hyderabad, 5th 6th, Jan, 2009.
  16. Assessment of Machine Tool performance through failure intensity analysis, National Conference on Robotics and Intelligent Manufacturing Process BHEL Corporate R&D Division, Hyderabad, 5th 6th, Jan, 2009.
  17. Optimum Process Plan Generation for Prismatic Parts Using Genetic Algorithms published in the proceedings of National Conference on Computer Aided Mechanical Engineering Design, pp.101-108, 8th9th November 2008, GIET, Gunpur, Orissa.
  18.  "Nanofluids for enhanced cooling of mechanical systems A study", MEMS, NEMS & Nano Engineering GMRIT, Rajam, PP: 65 69, 8 9th, Aug, 2008
  19.  Nano medicine The future application of nanotechnology, MEMS, NEMS & Nano Engineering GMRIT, Rajam, PP: 65 69, 8 9th, Aug, 2008.
  20.  An overview of smart materials, smart systems and their applications, MEMS, NEMS & Nano Engineering GMRIT, Rajam, PP: 65 69, 8 9th, Aug, 2008.
  21. Simultaneous Tolerance Synthesis for Manufacturing and Quality using MATLAB, Proceeding of National Conference on Challenges in 2020 Mechanical Engineering perspective(CITTMEP-2008),March 14 & 15,2008 , pp.22 - 28
  22.  Material Requirement Planning based on Feasible Production Schedule QRMAES-07, NIT Hamirpur, 27 28th December 2007.
  1. Web Integrated Online Condition Monitoring  Systems 4th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC-IV), organized by University College of Engineering, OU  & BHEL (R&D), in collaboration with The Vibration Institute of India from 17th to 19th December,2007.
  2. The use of Rapid Prototyping for Medical Applications: A Review QRMAES-07, NIT Hamirpur, 27 28th December 2007.
  3. Frame Work for Seamless Integration of CAD And CAM Using STEP Data   Exchange Standard 23RD National Convention of Mechanical Engineers at The Institution of Engineers (India), AP State Center, Hyderabad, 10th -12th Sep 2007.
  4. A frame work and database for interfacing CNC with STEP-NC National Conference on Factory Automation, Robotics and soft computing, pp. 143-148, 2007.
  5. New Data Interface process for a STEP Complaint Manufacturing National Conference on Factory Automation, Robotics and Soft Computing (NCFARSC-07). January-2007 at National Institute of Technology, Warangal.
  6. Simulation of consignment stock policy for single vendor-multi buyer in supply chains National Conference on Factory Automation, Robotics and soft computing, pp. 289-294, 2007.Multi objective scheduling of flexible manufacturing systems using evolutionary algorithms, National Conference on Factory Automation Robotics and Soft Computing, pp.298-303, 2007.
  7. Multi objective optimization of cellular layouts using evolutionary algorithms, National Conference on Factory Automation Robotics and Soft Computing, pp.310-314, 2007.
  8. A web integrated manufacturing system for turned components using sinutrain and autocad National Conference on Factory Automation Robotics and Soft Computing, 2007.
  9. Tolerance analysis of mechanical assemblies using autocad and matlab National Conference on Factory Automation Robotics and Soft Computing, 2007.
  10. Overview of quality management in supply chain management National Conference on Factory Automation Robotics and Soft Computing, 2007.
  11. Design of cam follower motions using bazier polynomials National Conference on Factory Automation Robotics and Soft Computing, 2007.
  12. Rapid prototyping issues in the 21st century national conference on design for product life cycle[DPLC 06], BITS Pilani, Pilani, India, February, 2006.
  13. Integrated design and analysis of Disc cams, National conference on recent trends in mechanical engineering, Velammal Engineering college, 3rd Feb, 2006.
  14. STEP-Compliant CNC machining system-An approach for collaborative manufacturing National Conference on Advances in CAD/CAM, 27th & 28th February 2006 at JNTU, Kakinada.
  15.  STEP-NC: An effort towards seamless integration of CAD/CAPP/CAM/CNC National Conference on Trends in Mechanical Engineering (TIME-06). Dec-2006, KITS, Wgl.
  16. Comparative of EKCS, CONWIP and HEKCS control mechanisms in a pull production system, 21st AIMTDR Conference, VIT, Vellore, INDIA, Dec 21-22, 2004.
  17. Development of Web Based Integrated Material Planning and Machine Scheduling System, National Conference on Advanced Materials and Manufacturing Techniques (AMMT 2004) March 8-9, 2004 at JNTU College of Engineering, Hyderabad.
  18. Computer aided design and manufacturing systems for cylindrical cams, National Conference on Advanced Materials and Manufacturing Techniques (AMMT 2004) March 8-9, 2004 at JNTU College of Engineering, Hyderabad.
  19. Modified consignment stock policy with Crashing stochastic lead times for effective inventory management in supply chains at 21st AIMTDR Organized by Vellore Institute of Technology, Vellore-Tamilnadu, during 20th to 22nd Dec.2004.
  20. Study of Simultaneous scheduling of vehicles and machines in FMS using simulation, 21st AIMTDR Conference, Vellore, December 2004.
  21. STEP-NC: A Realistic approach towards CIM, National Conference on Development in Engineering and Technology (DIET), March 2003, KITS, Warangal.
  22. Implementation issues of STEP-NC for Jobshops, National Conference on Advances in Manufacturing Systems (AMC-03), March 2003, Jadavpur University, Kolkatta.
  23. Performance evaluation of CONWIP control system using closed queuing network (CQN) and simulation, National conference on advance in manufacturing system, Jadavpur University, Kolkata, INDIA, March 28-29, 2003.
  24. Simulation analysis of hybrid control mechanisms in a pull type production system, National conference on trends in mechanical engineering. KITS, Warangal, INDIA, 30th Aug 2003.
  25. Development of an activity oriented scheduling system for a heavy engineering industry, presented and published in the National Conference on DIET 03 at KITS, Warangal.
  26. Role of Web in product design and manufacturing an overview, presented and published in the National Conference on DIET 03 at KITS, Warangal.
  27. Implementation of Evolutionary Algorithms in Scheduling with Multi objective Criteria, National Conference on Developments in Engineering and Technology, organized by The Institute of Engineering (India) Warangal Local Centre, conducted by KITS, Warangal.
  28. An overview of MEMS Technology and its applications, National Conference on Trends in Mechanical Engineering (TIME-2003), Conducted by Department of Mechanical Engineering, KITS, Warangal.
  29. The role of smart materials and MEMS in intelligent systems, 20th AIMTDR Conference, BITS Mishra India, during 13 15 December 2002.
  30. Shape Memory Alloys Prospective Materials of the Future, presented in the 20th All India Manufacturing Technology Design and Research Conference on Recent Trends in CAD/CAM, conducted by JNTU, Kakinada on 30th March 2002.
  31. Scheduling of Machines and AGV€™s in Flexible Manufacturing System using Genetic Algorithms, presented and published in the National Conference on Recent Trends in CAD/CAM, conducted by JNTU, Kakinada on 30th March 2002.
  32. Cost Optimization in Process Planning Using Petri Nets, National Conference on Computer Integrated Manufacturing, 15th May 2001, at AIT, Coimbatore.
  33. Computer Aided Facility Layout Design for Cellular Manufacturing, National Convention of Mechanical Engineers, Institute of Engineers, University of Roorkee, September 2000.
  34. Simultaneous Scheduling of Machines and Material Handling System in Automated Manufacturing, 19th AIMTDR Conference, Chennai, December 2000.
  35. Petri Net Models for process planning and sequence optimization, 19th AIMTDR Conference, IIT, Chennai, December 2000.
  36. Capacity Utilisation with cost effectiveness in a grinding wheel industry with emphasis on sequencing and scheduling, 19th AIMTDR Conference, I I T, Chennai, December 2000.
  37. An application of Genetic Algorithm to the Flow sop problem, accepted for publication in 18th AIMTDR Conference at IIT, Kharagpur, December 10-12, 1998.
  38. An Integrated System for Product Design and Assembly Analysis using DFA, accepted for publication in 18th AIMTDR Conference at IIT, Kharagpur, Dec. 10-12, 1998.
  39. Petri Net Based Models for Scheduling of Manufacturing Systems, accepted for publication in 18th AIMTDR Conference at IIT, Kharagpur, December 10-12, 1998.
  40. Design and Optimum NC Code generation for machining of plate cams, accepted for publication in  18th AIMTDR Conference at IIT, Kharagpur, Dec. 10-12, 1998.
  41. Lagrangian relaxation approach to scheduling problems, A review presented at 17th AIMTDR Conference Jan 9-11, 1997 at REC Warangal.
  42. Scheduling of Flexible Manufacturing Systems using penalty coefficient based heuristic search, Published at 17th AIMTDR Conference, Jan 9-11, 1997 at R.E.C Warangal.
  43. On-line monitoring of tool wear in drilling process using GMDH technique, 16th AIMTDR Conference Dec., 8-10, Bangalore, 1994.
  44. A Timed Petri Net based approach for optimal scheduling of FMS 16th AIMTDR Conference, Dec. 8-10, Bangalore, 1994.
  45. Development of Spline interpolator for machining sculptured surfaces, VIII ISME Conference of Mechanical Engg., 1993.
  46. Development of Pneumatically actuated plate fin manufacturing machine using programmable logic controller, 15th AIMTDR Conference, PSG College of Engg. Coimbatore, Dec. 1992.
  47. Evaluation of Parameters while drilling titanium Clad Steel Plate, 15th AIMTDR Conference, Dec., 1992.
  48. Computer Aided Design and Manufacturing of High precession plate cams, 15th AIMTDR Conference, PSG College of Engg. Coimbatore, Dec., 1992.
  49. Friction and Wear Characteristics of some materials Under Sliding Contact, 15th AIMTDR Conference, 1992 at Coimbatore.
  50. Expert System Approach to Computer Aided process planning, National Seminar on Expert systems in Engg. Hyderabad, Jan. 1992.
  51. Design and Computer Aided manufacturing of a Dies for Gas Turbine Blades, 9th National Conference of Production Engineers, Hyderabad, Sept. 1991.
  52. CADFORM Software for design of form tools, 7th National Convention of Production Engineers, Hyderabad, Sept. 1991.

 

Ph.D.'s Supervised


Sl. No.

Name of the Student

Title of Thesis

Year of award of Ph.D.

1

Arun Tom Mathew

Optimization of Assembly Sequence plans

2011

2

Veeresh Kumar G.B

Wear studies on AL MMCs and development and ANN techniques for prediction of wear.

2011

3

 D. Sreeramulu

Development of Responsive Intelligent Manufacturing System

2010

4

 Ch. Srinivas

Simulation and Development of Integrated Inventory Models in Supply Chain

2007

5

 K. Eswaraiah

Simultaneous Formation of Cells and Cellular Layouts and their Performance Studies using Grouping Genetic Algorithm and Simulation

2006

6

B. Siva Prasad Reddy

Simultaneous Scheduling of Machines AGVs in FMS Using Evolutionary Algorithms and Performance Evaluation Through Simulation

2005

7

N. Selvaraj

Performance Evaluation of Pull Production Control Mechanisms Using Analytical and Simulation Approaches

2004

8

V. Venugopal Reddy

Capacity Utilization and Scheduling of Manufacturing Systems Using Simulation and Analytical Techniques

2002

 

For JNTU & OU

Sl. No.

Name of the Student

Title of Thesis

Year of award of Ph.D.

1

V. Mahesh

Development of Integrated process planning and scheduling system

2008

2.

L. Sivarama Krishna

Integration of scheduling and inventory for multi-product manufacturing industry

2010

   3

 N. Sateesh

Modeling and analysis of CAM profiles using NURBS

2010

   4

Y. Ravi Kumar

Rapid prototyping of Medical implants

2011

   5

M. V. Sateesh

Simultaneous scheduling using intelligent heuristics

2011

   6

P. Sreekanth

Implementation issues of STEP-NC for jobshops

2011

   7

Y. Sesha Rao

Tolerance analysis using AutoCAD and MTALAB

2011

 


Workshop/SSTPs/Conference Organized


1.        Coordinator MHRDSTTP on Automation and Robotics, 6th July 16th July 2009.

2.       Coordinator MHRDSTTP on Digital Factory, 25th August 6th September 2008.

3.       CoordinatorMHRDSTTP on Modeling and Simulation of Engineering Systems, 7th to 19th July 2008.

4.       Organizing secretary A one day workshop on Rapid Prototyping Technology for Medical Implants Using CT scan and MIMICS, 10th December 2007

5.       Convener Seminar on Strategic Partnership Programmes among NITs Vis-à-vis Research and Academics, 24-25th November 2007

6.       CoordinatorISTESTTP on Mechatronics and MEMS, 12th March 2007 to 17th March 2007.

7.       Organizing secretary National Conference on Factory Automation, Robotics and Soft Computing, 18-19, January 2007.

8.       Coordinator A TEQIP Workshop on Genetic Algorithm for Mechanical Engineering Optimization Problems, 3rd March 2006 to 5th March 2006.

9.       CoordinatorISTESTTP on Responsive Manufacturing, 24th Jan 2005 to 5th Feb 2005.

10.    Coordinator National Workshop on Simulation of Manufacturing Systems, Oct. 2004.

11.    Co-coordinatorISTE-STTP on Intelligent Machines, 31st Dec. 2001 to 12th Jan. 2002.

12.    Coordinator ISTE-STTP on Systems Approach to CIM, 28th Dec. 19988th Jan. 1999.

13.    Editor & Organizer 17th AIMTDR Conference, 9 11, January 1997.

14.    Organizing SecretarySymposium on Future Trends in Manufacturing28th May 2000.

15.    Convener Seminar on Manufacturing Challenges in the Era of IT 30th August 2001.

 

 

DST/AICTE/MHRD or Other Sponsord R&D Projects


Sl. No

Title of the project

Amount

Rs. in Lakhs

Name of the Funding Agency

Status

1

College Research Project (grant)

0.75

RECW

Completed

2

Centre for Flexible Automation

7.00

AICTE

Completed

3

Centre for Manufacturing Simulation

5.00

AICTE

Completed

4

Simulation Studies on Design & Analysis of Manufacturing Systems

8.10

DST

Completed

5

Centre for CIM

16.00

MHRD

Completed

6

Productivity improvement studies for

 Government  Presses of Nagaland State

4.72

Consultancy

Completed

7

Development of Mechatronics Laboratory

30.00

DST

Completed

8

Development of Responsive Intelligent Manufacturing Systems

20.00

MHRD

Completed

9

Useful Life Estimation of Machine Tools

8.72

DRDL

Completed

10

Development of an Integrated Process Planning and Scheduling System for Missile Components

9.90

RCI, DRDL

Ongoing

11

Friction, Wear And Seizer Studies Of Al6061 And Al7075 PMMC€™S

21.78

DRDO

Ongoing

 

 

Awards And Honours


a)      Received award of Engineer of The Year Award 2008 on the occasion of 41st Engineers Day Celebrations from The Government of Andhra Pradesh and The Institution of Engineers (India), AP State Center,

b)      Received award of The Andhra Pradesh Scientist 2008 on the occasion of the National Science day Celebrations from Andhra Pradesh Council of Science and technology (APCOST) Govt. of Andhra Pradesh.

c)       Chaired a session at FAIM conference at Philadelphia, 2007

d)      Biography was published in Morquis Who is Who in Science & Engineering, 2006.

e)      Biography was published in Morquis Who is Who in Education, 2003.

f)       Biography published in 26th edition of International Biographies, 1998-99.

g)      Biography was published in Morquis Who is Who in the world, 1997.

h)      Selected by A.P.O. to participate International Seminar on CIM Systems at Seoul, South Korea, 27 March 2003.

i)        Invited to attend Asia seminar on Advances in Manufacturing as a delegate among the 70 people invited from all over Asian countries, Hyderabad, December 2000.

j)        Invited to chair a session at International Conference on Computers and Industrial Engineering at Greece 2002.

k)      DSTSERC Fellowship awarded in1998.

l)        Invited to Chair one session in International Conference on CAD/CAM and Robotics at Columbia in 1996.

m)    U.G.C. Visiting Fellowship awarded in 1994.

Reviewer for 5 International Journals and 4 Management Journals

 

Additional Responsibility


a) Hostel warden: Worked as Hostel Wardenfor 3-years. Stream lined several procedures in the messes and improved the facilities for efficient running of messes. Hostel Information System was proposed and got sanctioned and implemented successfully at NITW Hostels.

b) Confidential Team Member: Worked as a Confidential Team Memberin the following common entrance tests.

i) ECET-94     ii) ECET-95     iii) MCACET-97     iv) EAMCET-98

c) Executive member: Worked as    

i)     Honorary Secretary ISTE RECW Local Chapter.

ii)    Secretary NITW Teachers' Union

iii)  Vice-President Joint Council for Federation of National Institutes of Technology (still holding the office)

iv)     President NITW Teachers' Union

d) Head Production Engineering Section

e) Head School of Management

f) In-Charge Registrar NIT Warangal

 

Course Taught Previously

 

Publications

 

PHDs Supervised

 

Workshops/Conferences

 

Projects

 

Awards and Honors

 

Additional Responsibility